CarbJetKits.com

Search CarbJetKits

Thank You for visiting CarbJetKits.com
 
Menu

Hot deals

Random Items

From our Customers

Gavin 07/10/2013, 08:43 PM
Thanks guys, your no drill, stage two kit really brought my bike to life. It starts easier, idles smoother, and no longer shutters under wide open throttle! great kit!
Scott 07/11/2014, 02:02 AM
My 1983 v65 Magna has a mac 4 to 1 exhaust, and the jets have never been changed, 31 years. The simple jet calculator said ultimate, I said what the heck, for the price, to it me was worth it to check it out, well the bike runs smoother now, its not as noisy now at idle. Fast shipping, nice packing material. Thank you CarbJetKits, It worked for me.
jason irrera 01/16/2016, 07:00 PM
1/16/16 POD FILTER jey kit.

I just installed this jet kit. on my 85 vt500 bobber. I used both shims and PLESE NOTE MY SLIDES ARE DRILLED.

I set the A/F screws at the stock setting of 2.25 turns out. She fired up cold; 50* outside temp; instantly. WITHOUT choke but with winter time spark plugs. I set the idle and took her out. SHE RAN like a raped Ape. Fast as hell.

Thank you Carbjetkit for taking the time and R&D to find the PERFECT set-up for this mod. AWESOME JOB guys/gals.

https://www.youtube.com/watch?v=VeP3c3imzP8
Lindsey Dunlap 02/22/2016, 11:21 AM
Unleased the beast hiding in my 2000 honda shadow 600. My bike is known to be a bit sluggish but I love it anyway. After slip on mufflers, high flow air filter, 4 degree advanced timing and a jet kit from carbjetkits my bike has power all across the band. Now there's no hesitation off the line and a little twist of the throttle will put a smile on my face. Warm up use to take a good 5-10min. Now she's ready to go as soon as i get my helmet and gloves on.
Don Ignozza 05/14/2018, 11:21 AM
I received the Honda VF1100S saber 1984-85 Ultimate Jet kit - Hvf1100s84 and installed it the day I received it The V4 is a real pain to remove and in stall the carbs ..

My 1984 V65 Saber has a K&N filter in stock air box with Cobra F1 slip-on Mufflers, stock ignition..

I had a flat spot in the rpm range at 5500-6500rpm,a lean condition. With the ultimate kit and adjusting the float levels to the required 7.5mm(9/32) One float level was not in the required range,with two shims per needle transformed the performance machine pulling strong to 9800 rpm.

The jetting was spot on! The pilot screws where adjusted and final location was 2 turns out from being seated.

After a strong road test I checked the sparkplugs and they showed the correct fuel mixture (very light gray ,no soot).

Engine idles smoothly no over rich conditions. Very nice preforming setup.

I'm the original owner of this bike from NEW in 1984.

Yes I'm an old Dude,70 yrs old still turning wrenches on motorcycles and cars.


Thanks for a great kit,
Thomas Jeffords 08/30/2015, 09:06 AM
Thank God for carbjetkits.com I bought a 1984 Honda Shadow Vt700c that needed a lot of tlc. So I have been working on it for the past 6 months. Got everything done but just couldn't get it running right, sordid a little research and figured out that I needed to rejet the carbs after replacing the exhaust with aftermarket pipes and getting rid of the stock air cleaner system. I came to this site knowing nothing about rejetting except where the jets go. The guide was a life savers just plugged in my info and bingo it told me exactly what I needed. I installed the new jets and it purrs like a cat...runs perfectly, thanks carbjetkit.com...two thumbs up!
emory dillard 06/13/2012, 10:59 PM
two years and many dollars later you fix my bike for under 49 dollars you guys rock!!!!thank you so much your online calculations were spot on thanks!!
Anibal Castro 01/15/2017, 09:36 PM
I put pods on my 1982 honda nighthawk 750. Wouldn't hardly run. Placed your kit. Fantastic improvement. Thank you
David Watkins 10/17/2012, 11:49 PM
Got my jets in today and they look great and are just what I ordered. Thanks guys.
Jimmy 04/30/2013, 06:47 AM
howdy. my name is Jimmy. I don't have a question for you, just a remark on my recent purchase of a 2000 shadow vt600 jet kit. it did an awesome job! thank you very much. it was waaaaaaaaay waaaay cheaper than anything on ebay and i was a little leery at first but hott damn. my bike shits and gets now with no hesitation like it had before hand. thanks again for making a quality product without breaking the bank. if anyone ask me about jet kits, i'll be sending them ya'lls way!
Trevor Ribal 04/02/2012, 06:43 PM
This is the way that online transactions are suppose to work. i have been bugging this guy for like 2 weeks with all sorts of questions, he always has an answer. the shipping and prices cant be beat i have looked. ordered on Thursday had it in my hands on Monday. You have just got a customer for LIFE! Thanks for the parts and know how.
Dennis H. 10/16/2013, 08:25 AM
Jet kit is easy to install. My honda 1100 runs great. It gets about four miles to gallon better mileage.
Rob van Drongelen 08/28/2016, 01:47 AM
I ordered a jetkit for my Honda VLX600. I used the jet-calculator before making my order. Price was great, no shiping costs to The Netherlands and delivered in 4 days. That's amazing!

Jets work great and my bike runs ,after modifications, very well.
Steve 10/19/2015, 07:52 AM
Ordered a Carb Kit for our 2000 Honda Valkyrie with intake and exhaust modifications. It arrived quick and the kit was correct for the modifications done. Very pleased.
This particular motorcycle is not for the inexperienced to tackle.
Carlos 05/26/2012, 08:36 PM
Hey guys,
Jets came in today, installed them and a new K7N pod filter and I LOVE the horsepower increase !
This was a quick,painless and awesome order !
Thanks Much
ROGER L 04/20/2012, 11:16 AM
ORDERED FOR MY 1100 SHADOW. WORKED GREAT !! HIGHLY RECOMEND !!
view all