CarbJetKits.com

Search CarbJetKits

Thank You for visiting CarbJetKits.com
 
Menu

Hot deals

Random Items

From our Customers

Dimitris 09/27/2015, 10:40 AM
1995 Honda Magna 750 VF . I'm very glad i purchased a set of new jets for my Magna when i cleaned the carbs . She never run so strong . Great gas response and improved gas milage . Highly recomended
Mark 06/27/2012, 12:20 PM
Top quality!! fast delivery. Bike runs so smooth up through the range now. Starts cold without the choke. Highly recommend Carbjetkits!!
Chip 05/05/2015, 08:06 PM
Incredible. I installed your jet kit on my 1985 Honda Shadow VT700C. Before your kit the bike dogged at low rpm. Now she runs like a new bike. I am amazed and pleased beyond words.
Matthew Gioia 12/28/2024, 05:07 PM
Easily the best $60 I've spent on my 1985 Honda Magna V30 yet. I thought my pilot jets were clean but one comparison against my new jets showed how much larger the opening was on the new jets. I was very happy that the pilot and main jets were both OEM (Keihin) and the shims fit well. Thanks again and you have my business from now on!
Danny Hildebrand 01/02/2012, 12:24 PM
Very simple and succinct. Installation straightforward. Results were what I expected. Bike runs great. Loved the jet kit calculator----spot on.
Roger 03/07/2013, 10:26 AM
I bought and installed this kit on my 1998 Honda Shadow VT 600. The results have been fantastic. It idles and accelerates much better. I would recommend this kit to anyone. Installation was a snap and the instructions were clear and concise. I am ordering one for my son's Yamaha next.
Pete In PA 04/14/2016, 03:29 PM
Great customer service and price! Fast delivery! Got my Honda 250 Nighthawk running great with no dead spots . No more long waits to warm up from cold. Started it at 30 degrees F.
I'll also add to pull the resistors out of the spark plug caps and then set plug gap to .035 in. from the too small .020-.030 in.
Zach 08/02/2015, 11:57 PM
Used the calculator to find the correct jets for my 1993 Honda shadow which is heavily modded. Worked perfectly!! Will be doing business with you guys again once I build the turbo kit for my bike! Thanks again!
Frank 04/15/2014, 11:11 AM
Flawless from the jet calc to install, these folks are providing a heck of a service to bikers. Support them by making your bike run awesome.
Russell Carpenter 10/25/2013, 08:48 AM
My 94 Magna had sat for over 8 years and now she is running great again thanks to the your product. Lower RPM would bog down and make the exhast pop and snap until I replaced the plague plagued pilot jets. Now she runs better than new. Thanks Gang. If you don't have one make sure you order the D-Tool, cant beat it for the price.
Mike A 04/13/2017, 03:29 PM
Amazing transformation to my 1998 Honda Magna. It used to run extremely lean and it took 20 minutes to warm up so that I could even ride it. Would never start without choke, and the list of issues goes on and on.
I quickly calculated the jet kit needed for my bike and within days you guys had it delivered. A few hours later, I had it installed. Now my bike fires up instantly, without the choke, and is ready to ride without any warm up needed.
Your jet kit and install guide was so easy to follow and install. It is exactly what my bike and I needed. I am looking forward to an amazing year of riding!
Thanks again,
Mike A.
David Short 03/07/2012, 09:22 PM
Advice and great service. About jet sizes for my bike and intake pipes and running the 104 octane. Recommend.
Chuck Meinsler 09/27/2013, 08:32 AM
The Ultimate kit for my 1985 Honda VT500c worked perfectly. My exhaust mod is cutting the 2 into 1 section of the stock muffler off, removing the guts, then a simple welded patch creating a small chamber that connects to the right side pipe only. Still using stock airbox and filter. I now experience 'accidental' wheelies. It's like a whole new bike.
Josh Wilshusen 10/29/2012, 01:21 AM
Just finished Honda CB 750 K main jet up and needle shims and although this is my first time working on motorcycle carbs at all the instructions on the sight were easily followed even though example did not match exactly what I had.. The instal went by smoothly. After removing carbs the install of jets and shims took about ten minutes..
Loved the jets
James C 07/17/2014, 06:03 PM
Ordered my jet kit off the recommendations of the calculator. First time jetting a carb. Shipping was super fast. Cleaned the carbs, popped in the new jets, and needle shims. Bike fired right up. Great to only have to pull the carbs once.
michael harris 06/23/2015, 10:41 PM
thanks the jets fixxed my problem thanks
view all