Our Kits Includes everything for all Carbs!
We stock 10,000's of Carburetor Jets, float valves and fuel screws.
Also available for your Honda VF750C Magna 1988 .
Replacement Fuel Screw 16016MAH670: Show me in new window
Frequently Asked Questions
Q: Are the jet Kits for all carburetors or for one Carburetor?
A: You only need 1 Jet Kit for your Motorcycle. If your motorcycle has two carburetors, you will receive two sets, if your motorcycle has 4 carburetors, you will receive 4 sets.
Q: What are the needle shims for?
A: Needle shims are used to raise the needle to allow for increased fuel delivery mainly during mid range RPM's. This is a cheaper but effective alternative to so called tapered needles. 2 needle shims are comparable to 1 clip position on the expensive needles. In combination with a better Pilot Jet, shimmed needles are highly effective.
Q: Why do you include Pilot Jets?
A: We are the only supplier of carburetor jet Kits providing Pilot Jets in our Jet Kits. The Pilot Jets are very effective in decreasing deceleration popping, improving cold start and low RPM performance. Combined with needle shims and better Main Jets, a total RPM range improvement is established.
Q: Is the Jet Kit easy to install?
CarbJetKits is the leading provider for easy to use, cost effective and optimal carburetor Jet Kits for Motorcycles.
Modifications to the air intake and/or Exhaust system to your motorcycle will change the air/fuel mixture to your carburetors causing a lean running condition.
CarbJetKits provides Jet Kits to compensate for the lean running condition.
Lean running conditions can destroy your engine and decreases overall performance.
CarbJetKits Jet kits are easy to install and do NOT require drilling the needle slides
Please contact us if you need any additional assistance
No posts found